How to Operate a Deep Sea Controller? – Diesel Generators
How to Operate a Deep Sea Controller – Manual Operation: 1. Select manual mode. 2. Press Start to crank the engine, which will run off-line. 3. Wait for the 'Generator Available' LED to turn on, then manually switch the generator on-line. 4. Only perform this in emergencies when the generator fails to start during a power failure. 5. Use the Stop button to immediately stop the generator. 6. The Auto button initiates the auto shutdown sequence.
Post-Operation: Ensure generator is returned to automatic operation by pressing Auto and keeping the heater switch ON.
Contact Information: For inquiries about the Deep Sea Controller, call 0845 055 8455.
Please follow the steps on How to Operate a Deep Sea Controller – Manual Operation
- Select manual mode.
- Press the Start push-button to crank the engine, the engine will start and run off-line.
- When the ‘Generator Available’ LED is on (after a delay to allow the oil pressure to rise) the generator can be manually switched on-line.
Pressing the manual mode, close generator push-button.
Only carry out this operation in emergency situations, where the generator has failed to start during a utility mains failure.
- Pressing the Stop push-button will stop the generator immediately.
- Pressing the Auto push-button will start the auto shutdown sequence.
After manual operation
When the engine has stopped, ensure that the generator is returned to automatic operation, by operating the Auto push-button, and that the heater switch is in the ‘ON’ position.
